Creatine gummy manufacturing
Creatine gummies with a real dose in every gummy
1.5 g of Creapure creatine per gummy, a dose many gummy makers will not attempt. Put your label on our ready-to-brand creatine gummy or build your own, made in the USA.
What makes a creatine gummy hard to make?
The dose. A typical gummy carries about 10 percent of its weight as active ingredients, so a 3 g gummy holds roughly 300 mg. Creatine is usually taken at 3 to 5 g a day, so a gummy built the usual way would need ten or more pieces per serving. Ours is built differently on purpose: creatine makes up a far larger share of each gummy than the usual 10 percent, so every gummy carries 1.5 g of Creapure creatine and a serving is two to three gummies.
The second problem is proof. Heat, moisture and acid can change what ends up in a gummy, so the number that matters is the certificate of analysis (COA) from the full production run, not a bench sample. We test the real batch and you receive the COA. If your customer needs a bigger serving than gummies can carry sensibly, we will say so and suggest a creatine tablet or a stick pack instead.
Last updated October 31, 2026
How to choose a creatine gummy manufacturer
To choose a creatine gummy manufacturer, start with the number on the label. Ask how much creatine is in each gummy and how many gummies make a serving, because a gummy usually holds only about 10 percent of its weight as active ingredients. Ask which creatine they use and where it comes from. Ask for the certificate of analysis (COA) from a full production run, tested for creatine, since heat, moisture and acid can change what survives into the finished gummy. Check whether you can start from a ready-made formula to launch quickly or need a custom flavor and base. And check that the same team bottles and packs the gummies. MCM Labs makes creatine gummies for brands across the United States, with 1.5 g of Creapure creatine per gummy.
- Creatine per gummy, in writing. The grams of creatine in each gummy and the gummies per serving, before you pay for anything.
- A named creatine source. Know exactly which creatine is in the gummy. Ours is Creapure; naming it on your own label is a separate conversation about the supplier's trademark.
- A COA from the full run. Tested for creatine on the production batch, not only on a bench sample.
- Ready-made or custom. A ready-to-brand creatine gummy to launch fast, or your own flavor and base.
- Packing with the same team. Bottled with a desiccant, sealed, labeled and case-packed in one place.
What you get
1.5 g per gummy
Creapure creatine in every gummy, so a serving is two to three gummies, not a handful.
Ready-to-brand formula
Our creatine gummy with your label: the fastest way to launch.
Custom flavor and base
Change the flavor, color, shape or base to make the product yours.
COA on the real batch
Every production batch is tested against its specification and label claim.
Desiccant in every bottle
Gummies pick up moisture, so every bottle gets a desiccant as standard.
Other creatine formats
A large-format creatine tablet, stick packs or tubs when the serving is bigger.
How a creatine gummy project runs
Brief
Your brand, channel, serving and whether you want our formula or your own.
Formula and label
Ready-made: your label artwork on our formula. Custom: flavor, base and dose worked out with our chemist.
Production-scale batch
A real production-scale batch whose COA shows the creatine in the gummy.
Pack-out
Bottled with a desiccant, sealed, labeled and case-packed. A ready-made formula takes about 1 to 2 weeks on our side once artwork is approved; a custom gummy typically takes 3 to 4 months. Treat these as estimates until your proposal.
Questions about creatine gummy manufacturing
How much creatine is in each gummy?
1.5 g of Creapure creatine per gummy. Most creatine products are taken at 3 to 5 g a day, so a serving is two to three gummies.
Why do many creatine gummies need so many pieces?
A gummy normally carries about 10 percent of its weight as active ingredients, roughly 300 mg in a 3 g gummy. At that level a 3 to 5 g serving takes ten or more gummies, which is why the dose per gummy is the first thing to check.
Can I put my own label on your creatine gummy?
Yes. Our creatine gummy is one of our ready-to-brand formulas. Send a brief, we quote a starting run, and once your label artwork is approved our side typically takes about 1 to 2 weeks.
Can you make a custom creatine gummy?
Yes. We can change the flavor, color, shape or base, or build a formula around your brand. Custom gummies typically take 3 to 4 months from approved formula to finished product.
Do I get a certificate of analysis?
Yes. Each production batch is tested against its specification and label claim, and you receive the COA.
What if I want a bigger serving?
For 5 g in one serving, a stick pack or tub powder is usually the better format. A large-format creatine tablet is another option for a bigger serving.
What is the minimum order?
We work with flexible entry volumes. Send a brief with your target volume and we will quote a starting run.
Related services
Private label supplements
Put your brand on a proven gummy, tablet or capsule formula, or change the flavor, dose or format to make it yours. Direct to the factory, no broker in the middle.
Tablet manufacturing
High-dose tablets, chewables and coated tablets, designed around the dose your customer actually needs. Natural colors or none. Pressed, bottled and labeled in our own facility.
Powder manufacturing
Tub and single-serve powders for creatine, electrolytes, greens, energy and drink mixes, built to taste right, mix cleanly and stay dry on the shelf. Blended and packed in our own facility.
Tell us what you're making. We'll come back with a plan.
A short brief is enough: the product idea, the active and dose you have in mind, the channel you're selling into, and the volume you're planning for. We reply within one business day.
info@mcm-labs.com · (702) 728-0966